easy to move, activated carbon filter replace, low noise, wind-direction adjustable, with the light at the top, ( may differ slighty from picture ) Voltage: 220 - 240V AC 50Hz Power consumption: 14-16W 02/05 jj
click to enlarge
WFE Small portable, quiet compressed air driven for stand alone tip suction Ref: 0053640299
price 1 of £329.00 5 to 10 £311.81 10 plus £293.46
The Weller WFE is a small, portable unit designed for soldering
WFE Small portable, quiet compressed air driven for stand alone tip suction 0308yan
fume extraction with up to two FE soldering irons.
The WFE requires clean and oil-free compressed air. The
vacuum is generated by a maintenance-free compressed
air converter. The contaminated air is purified by a prefilter
and main filter system.
The pre filter consists of a fine dust filter F7.
The compact main filter cartridge consists of a wide band
gas filter (50% active carbon, 50% Puratex) and a HEPA
filter of class H13. A compressed air cleaning filter removes
additional odours caused by the compressed air. This
highly efficient filter system makes the WFE a genuine air
recovery system. The filter-lift system allows fast and convenient
replacement of the filter cartridge. The FE soldering
irons are connected directly to the unit - additional
leads are not required. dc0308
For further information and PDFs Click Here
The Weller WFE P is soldering fume extraction unit runs
with line voltage for one or two FE soldering irons.
In contrast to the WFE, an electric, long-life and optimally
soundproofed vacuum pump guarantees the required
vacuum, this making the WFE P independent of compressed
air. The vacuum pump has two power stages, which
can be set by means of rocker switches according to the
number of connected FE soldering irons. This saves energy.
The motor is maintenance-free and has a thermal over
load to protect the unit.
The WFE P has a three stage filter system comprising a F7
grade fine dust filter, and main filter consisting of a wide
band gas filter (50% active carbon and 50% puratex) and
a HEPA class 13 fine particle filter.
The Filter lift system allows fast and convenient main filter
replacement.
FE irons are connected directly to unit additional leads
are not required. RW0308
For further information and PDFs Click Here
The Weller WFE 2S extraction unit purifies the air at up
to two workplaces. It is designed as a central system
directly at the workplace. A powerful, maintenance-free
pump provides continuous fume extraction at a maximum
air extraction rate of 230 m3/h. A built-in microprocessor
controls the adjustable pump speed. This avoids
unnecessary waste of suction power and saves energy.
The three-stage filter system is included in the scope of
delivery and can be replaced easily. It comprises a fine
dust filter (F5) and a combined HEPA filter and wide band
gas filter. The WFE 2S extraction unit is supplied with a
pipe connecting element 50 for the extraction hose 50.
The extensive range of accessories, such as extraction
nozzles and hoods, allows versatile and flexible use of
the system. 03/08RW
For further information and PDFs Click Here
The tried and tested Weller WFE 2S fume extraction
system is available in two user friendly, stand alone
systems. Designed for use in industrial, service and laboratory
applications these units are supplied complete
with flexible hoses, extraction arms, mounting brackets
and system seals, ready for installation in situe. Additional
extraction arms with other extraction nozzles, extraction
hoods and plates are available as optional extras.
All arms hoses and hoods are ESD safe. 0308RW
For further information and PDFs Click Here
The tried and tested Weller WFE 2S fume extraction
system is available in two user friendly, stand alone
systems. Designed for use in industrial, service and laboratory
applications these units are supplied complete
with flexible hoses, extraction arms, mounting brackets
and system seals, ready for installation in situe. Additional
extraction arms with other extraction nozzles, extraction
hoods and plates are available as optional extras.
All arms hoses and hoods are ESD safe. 0308RW
For further information and PDFs Click Here
The combination of pumps and filter removes this hazard.
The new WFE 2ES Fume Extraction System from Weller purifies the air at the work place. A powerful maintenance-free turbine provides a continuous fume extraction vacuum flow at the maximum rate of 220 m3/h.
The standard WFE 2ES Kit is supplied complete with no arms. An optional Arm Extraction Kit is available which when fitted allows the system to support one or two work places.
The compact filter system fitted as standard in the WFE 2ES is made up of a F5-class fine dust filter and a Puratex H12 Filter combined with a wide band gas filter and is easy to replace.
A wide range of accessories including extraction arms and extraction hoods make it flexible for up to two work places.
Features & benefits :
The WFE 2ES system guarantees a filtration efficiency of 99.5%. The compact filter system housed inside is made from a F5-class fine dust filter and a Puratex compact H12 filter (with active carbon section) ensuring an efficient and reliable extraction function.
The powerful brush-less and maintenance free turbine (1800 Pascal) extracts at a volume capacity of 220m3/h resulting in fast and effective removal of pollution from the air.
The increased levels of air-born pollutants produced at the workplace by lead free soldering are safely and easily removed by the WFE 2ES system.
Low noise emission: less than 55 dBA.
Weller’s wide range of accessories gives users a high degree of operational flexibility. Additionally there is no need for specialist on site installation and combined with the low cost outlay this makes the WFE 2ES a highly efficient and cost –effective fume extraction system for up to two work places.
Application information:
The WFE 2ES system is used in applications where volume extraction is the most suitable option needed by the customer.
The WFE 2ES system is particularly effective in lead-free soldering applications where there are a significant amount of air-born pollutants produced.
04/08 JJ
click to enlarge For further information and PDFs Click Here
Never knowingly undersold and we will MATCH any cheaper published price for this MODEL, Fast delivery and FREE carriage on most products.
second arm for this unit is available at £85.00 to make it a 2 station unit
0053637299 WFAF 50 extraction arm 1 m
0053637299 Extraction hose 580 mm, 3 m
0058735327 WFTB 50 bench mounting bracket with damper foor extraction qrm
0053637199 WFFMP 50 adaptor
0058735879 Hose clamp 50 70 mm
click to enlarge For further information and PDFs Click Here
available for same day dispatch
0053637299 WFAF 50 extraction arm 1 m
0053637299 Extraction hose 580 mm, 3 m
0058735327 WFTB 50 bench mounting bracket with damper foor extraction qrm
0053637199 WFFMP 50 adaptor
0058735879 Hose clamp 50 70 mm
03/08 jj
click to enlarge For further information and PDFs Click Here
The WFE20D is designed for tip extraction applications.
Upto 5 Weller FE soldering irons can be connected directly;
indirectly, via pipe system 50 available as an accessory:
up to 20 FE soldering irons.
The powerful maintenance-free turbine generates a vacuum
of 12.000 Pa and is electronically controlled. The operating
hours and the level of filter contamination are also
recorded electronically.
The filter system has three stages. It comprises a fine dust
filter F5 and a compact filter, consisting of a HEPA filter
H13 and a wide band gas
filter (50 % active carbon, 50 % Puratex). The filter
system achieves a filtration rate of 99.95 % as per EN
1822 with a particle size of 0.12 ìm. 03/08RW
For further information and PDFs Click Here
The WFE 4S is able to extract fumes from up to 8 workstations. The powerful maintenance 0308yan
free variable speed pump is electronically controlled, and has a maximum capacity
of 615m3/h. It has 3 operating modes. Standard speed control selected by the user irrespective
of the load on the system. Speed limiting control, when the pump speed is
automatically varied to match the load on the system and Economy control, when the
rate of fume absorption is maintained at a constant value.
The operating hours and the filter condition is also recorded. A three-stage filter comprising
a fine dust filter (F5), HEPA filter and wide band gas filter is fitted to the standard
unit but an adhesive fume absorption filter can be fitted. A flanged connecting
pipe suitable for connection to the Weller pipe system 75 is supplied. A wide range of
system 75 pipes, fittings and accessories are available to meet all installations and applications. 0308RW
For further information and PDFs Click Here
Dimensions mm H x D x W 450 x 300 x 300 Weight Kg 15 Air Flow (with filters fitted) 320m3h
Power Unit Radial Blower Voltage 230 1ph Noise Level dBA 52 Filter Efficiency 0.5 micron 95%
Maximum number of 50mm Arms,Cowls or Down Draft Trays EC = 2, US = 2 Maximum number of 75mm Arms,Cowls or Down Draft Trays EC = 2, US = 2
03/08 jj
click to enlarge
50mm ESD stay put extraction arm Installation flex Table bracket Bofa’s unique flip top flush
sealing mounting plate Solid carbon block filter Filter blocked indicator This unit is ideal for factories with changing demand which result in production layout changes. This system is fully comprehensive with an airflow of 90m3h and 99.997% HEPA filtration.Dimensions mm H x D x W 380 x 260 x 260
Weight Kg 7 Flow Rate 4.5mm I/D Hose 90m3h Power Unit Radial Ventilator Rated Output kW 0.058
Voltage 230 1ph Noise Level dBA 48 Duct Size mm - Duct Run mtrs - Filter Efficiency 99.997% (Down to 0.3 micron DOP) 03/08 jj
click to enlarge
Installation flex Table bracket Bofa's unique flip top flush sealing mounting plate Solid carbon block filter
Filter blocked indicator 99.997% HEPA filtration Dimensions mm H x D x W 480 x 260 x 280
Weight Kg 10 Flow Rate 4.5mm I/D Hose 180m3h Power Unit Radial Ventilator Rated Output kW 0.12
Voltage 230 1ph Noise Level dBA 55 Duct Size mm 75 Duct Run mtrs 6 Filter Efficiency 99.997% (Down to 0.3 micron DOP) 03/08 jj j
click to enlarge
