Panavise Circuit Board Holders

Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. Arms move independently. Add the 318 Accessory Cross Bars and the bar width can be xtended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide. Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use.

Ratcheted pivot for added adjustability, holds board horizontally, vertically or any angle in between.

The stem is 5/8" (15.9mm) in diameter and fits all 300 Series Bases. Overall height (including stem) is 10 7/8" (276.2mm) 05/05 jj

Click for bigger image

The PanaVise Electronic Work Center is a complete and economical work bench combination. It delivers a set of circuit board holders, all the "tilt, turn and rotate" control of a 300 Standard Base, the convenience of a 312 Tray Base Mount and a 371 Solder Station. Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. Arms move independently. Add the 318 Accessory Cross Bars and the bar width can be extended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide.

Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use. All parts, tooling, wire, soldering iron and PC Boards are located exactly where you want them. Sturdy and stable. The 324 Electronic Work Center stands 13 1/2" (342.9mm) tall and weighs 4lbs. 8oz. (2kg). 05/05 jj
Click for bigger image

The PanaVise Rapid Assembly Circuit Board Holder features eight position rotating adjustment, six positive lock positions in the vertical plane and height adjustment for quick board rotation speeds and component insertion and soldering.

Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. Arms move independently. Add the 318 Accessory Cross Bars and the bar width can be Extended from 14" (355.6mm) to 30" (762mm) to hold boards up to 28" (711.2mm) wide. Arms move independently and may be positioned adjacent to each other. Additional sets of arms (Model 316) are available for dual or multiple board use.

Weighted base is extremely stable. Weighs 6lbs. 7oz. (2.9kgs). Height from base to top of vertical shaft is 10" (254mm). 05/05 jj

Click for bigger image