Neoprene Pads (pair) - Model 204 The neoprene jaw pads slip over the ends of the model 201 PVJr. or 203 PV Jr. Head. Soft, gentle with plenty of holding power 05/05 jj Click for bigger image |
 |
Add extra arms for multi circuit board work to any PanaVise Circuit Board Holder. Hold circuit boards from 1/8" (3.2mm) to 12" (304.8mm) wide and 5/32" (4mm) thick. "V" notches postioned laterally near the arm tips securely and conveniently hold small electronic parts 06/03 05/05 jj Click for bigger image |
|
Add a longer Circuit Board Cross Bars to any PanaVise Curcuit Board Holder to hold wider circuit boards or for multi circuit board work. These longer bars are availble in 4" (101.6mm) increments from 14" (355.6mm) to 30" (762mm). 05/05 jj Click for bigger image |
|
|
|
The 343 Nylon jaws offer excellent electrical insulation and gentle holding power. Made of type 66 nylon. Will withstand intermittent heat to 300°F (149°C), or a continuous 200°F (93°C). Included standard on the 303 Standard Head. 05/05 jj Click for bigger image |
|
The 344 Grooved Nylon jaws are similar to the 343 Nylon Jaws except that they have a small horizontal groove running the width of the jaws. Perfect for holding small tubes, rods, and small circuit boards firmly in place. 05/05 jj Click for bigger image |
|
The reversible 346 Neoprene Jaw Pads are used with the 366 Wide Opening Head and the 376 Self-Centering Head. These thick, molded pads have a corrugated surface on one side to firmly hold the most delicate items. Flip the pads around and use the wide "V" to hold round objects. 05/05 jj Click for bigger image |
|
The model 352 Teflon® High Heat jaws won't scratch or mar delicate pieces. Specifically designed for high heat environments up to 500°F (260°C). 05/05 jj Click for bigger image |
|
The model 353 Plated Steel jaws are recommended when working with high heat or heavy objects. Included standard on the 304 Low-Profile Head. 05/05 jj Click for bigger image |
|
The model 354 Brass jaws are non-marring alternative to the 353 Steel Jaws for heavy or high heat applications. Prefect for Jewelry making. 05/05 jj Click for bigger image |
|
The Wire Manager is a handy time-saver that helps organize your task when working with multiple wire leads. The tempered coil spring is also a convenient place to keep small tools close at hand. Pivots away from the jaws when not in use. Slides onto the end of a 366 Wide Opening Head or 376 Extra Wide Opening Head. 05/05 jj POA Click for bigger image |
|
The Solder Station is a combination soldering iron holder and controlled-feed holder for standard spools of solder and wire. Two nib sponges with self-purging slits are included. The station attaches to the 312 Tray Base Mount or to the 308 Weighted Base Mount. It may also be used as freestanding unit and is easily attached to a bench or wall. 05/05 jj Click for bigger image |
|
Replacement for torn or damaged 380 Vacuum Base Pad. Includes rubber pad, handle and lockwasher. 06/03 JJ 05/05 jj Click for bigger image |
|
