Data Comm Cable Tracers also see Tracing Kits

Wiremap (T568A-B), length measurement, shield continuity, and fault identification such as opens, shorts, miswire, split pairs and reversal Identify port services (i.e., Ethernet, ISDN, POTS and Token-Ring)

Support Hub Blink and PING to confirm network connectivity Access DHCP hosts automatically to obtains network information Report Ethernet network performan ce information

Detect "Phantom Power" per IEEE 802.3af specifications Report current and voltage capability of analog telephone lines Perform up to 4 tones for cable tracing and isolation Easy to read LCD with Back-light

Kit includes : 1 main unit 8 remotes with RJ45 socket 9 jumper cables with RJ45 connectors

3 jumper cables with RJ11 connectors 1 adapter RJ11 to alligator clip 1 adapter RJ45 to alligator clip

1 carrying case 12/04 jj
click to enlarge

Provides four functions: tone generation, continuity testing, talk battery and line polarity confirmation

Built-in regulated signal amplitude generates an unbalanced tone that travels farther on Cat5+ cables

Three distinct tones selected from front panel Auto-Off after 3 hours to conserve battery Separate Talk Battery function for added power with craft testsets Tone can be added in any mode Constant tone amplitude over life of the battery RJ jack allows for easy replacement of the lead set or cable assembly Battery cap allows for easy battery replacement 9V battery included

12/04 JJ
click to enlarge

Battery cap allows for easy battery replacement Exceptional signal acquisition sensitivity to assure pinpoint identification Adjustable volume control for noisy environments Easy to replace tip without opening the case

Battery low indicator to identify when to change battery Recessed on/off button to prevent battery drain

9 Volt battery included Made in the USA 12/04 jj
click to enlarge

Kit includes: Main tester Eight twisted pair remotes, Eight CATV color coded F-Terminators , Nine RJ-45 shielded jumper cables Nine RJ-11 jumper cables , RJ-45 to F-connector adapter , RJ-45 to RJ-11 adapter

RJ-45 to alligator clip cable assembly , RJ-11 to alligator clip cable assembly Carrying case , Blinks HUBS to assure connected configurations Tests for shield continuity, shorts, opens, miswires, reversals and split pairs with remote connected Will display wire map for 10Base-T and Token Ring with remote connected

UTP, ScTP, and coax length measurement in feet or meters using cable capacitance method

Coax mapping with up to eight color coded coax remotes One ended testing for shorts, opens and split pairs (no remote connected) Test results displayed in wire map format with message line for shorts and split pairs

Displays PASS and sounds beep (optional) for T568A B Tone generator mode sends four different tones on all conductors, selected pair or selected pin Auto-off in any mode and low power consumption for long battery life

Increased voice testing capability detects RJ-11 (1, 2, or 3 pair) , Voice test also shows Normal or Reverse for pins 1 through 6 , Length measurement is shown during initial test results for convenience and time savings

Eight twisted pair remotes have both RJ-45 and RJ-11 jacks for longer life and increased testing capabilities

Two line by 16 character full alphanumeric LCD with icons for clear results , Larger back-lighted LCD screen for better test results readability , Toggle ON OFF option of lighted display for battery power savings

Low Battery symbol indicates when to change battery , Black battery cap allows for quick and easy battery change , Second jack acts as internal remote and allows patch cord testing on main tester unit only

Will identify if connected to network device during length test , 9 volt battery included in tester

12/04 jj

click to enlarge

VDV MultiMedia Cable Tester Easy-to-use tester for installers working with voice, data and video applications. One tester for all applications! Voice- supports 3-pair USOC and 6-position RJ-11 12 jacks for telephone cable testing Data- supports both shielded and unshielded cable testing to T568A B (RJ-45) Video- tests coax cable for opens and shorts with F-connector interface Tests for opens, shorts, miswires, reversals and split pairs. Also indicates correct wiremap. Has automatic shut off (to prolong battery life) and low battery indicator.

Easy to read LCD display with PASS or FAIL indicator after each test. Tone generator supports 4 different tones making fault isolation easier. Identifies voltage on cables.One remote wiremap and testing unit is stored inside tester - easier to keep all parts together. Uniquely designed remote accommodates RJ-11, RJ-45 and F-style connectors Can support up to 8 unique remotes that wiremap and test ports - more efficient for one-person testing 1 12/04 jj
click to enlarge

Designed for professional installers and maintenance technicians for mapping, testing and troubleshooting.

Kit Includes: PathFinder tester (main test unit) PathFinder tes ter remote A PathFinder tester remote B

PathFinder tester remote C PathFinder tester remote D Four 5" - 8 position 8 conductor cable assemblies

BNC terminator (500 ohm) 12/04 jj
click to enlarge